ACU-RITE 100S - Manual (Page 9)

6 100S General Purpose Reference Manual
Setup
Display Resolution
The display resolution determines how detailed each scale’s position will
be displayed on the readout. Use the setting that best suits each job.
To change the display resolution:
• Press the SETUP key. (“diS” will show on the display.)
• Press the AXIS key for the display you want to change.
For 10µm scales, the display resolution will toggle between 0.01 mm
(0.0005”) and 0.02 mm (0.001”). For 5µm scales, it will toggle
between 0.005 mm (0.0002”) and 0.01 mm (0.0005”). For 1µm
scales, it will toggle between 0.001 mm (0.00005”) and 0.002 mm
(0.0001”).
• After you complete setting your display resolution, press ENTER to
continue with setup or press SETUP to return to the normal DRO
display.