ACU-RITE 100S - Manual (Page 30)

100S General Purpose Reference Manual 27
Reference
Keypad
Here’s an overview of the 100S
GP keypad. Each key’s function
is described below.
ABS/INCR
Used to switch between absolute (ABS) and in-
cremental (INCR) measurements. The active
mode will be displayed at the top of the DRO
display.
RAD/DIA
Used to switch between radius (RAD) and
diameter (DIA) dimensions. The DIA indi-
cator will light up when diameter is dis-
played.
MM
Press this key to switch the X, Y and Z dis-
plays between English and metric units.
X, Y, Z (depending
on how many
axes are re
ZERO
Correspond with the scales on the X, Y,and
Z-axes. Used to specify a change to a particular
axis.
These keys reset the incremental or absolute
display position at “0” for the corresponding
axis.
SETUP
Provides access to the display resolution, en-
coder resolution, position recall, linear error
compensation, radius/diameter and scale count
direction.