Acura 2011 ZDX - Manual (Page 569)

When replacing a wiper blade, make
sure not to drop the wiper blade or
wiper arm down on the windshield.
3. Remove the blade from its holder
by grabbing the tabbed end of the
blade. Pull firmly until the tabs
come out of the holder.
4. Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in the
slots along the edge of the new
blade.
Make sure the two rubber tabs
inside the blade fit to each notch of
the reinforcement, as shown.
BLADE
REINFORCEMENT
BLADE
CONTINUED
Wiper Blades
565
Maintenance
10/07/06 18:05:30 11 ACURA ZDX KA KC MMC North America Own 50 31SZN610 enu
2011 ZDX