Acura 2011 ZDX - Manual (Page 284)

TUNE － Use the TUNE bar to tune
the radio to a desired frequency.
Press the
side of the bar to tune to
a higher frequency, or the side to
tune to a lower frequency. To tune
with the interface dial, push the
interface selector down, and turn the
interface dial to select Tune. Then
press ENTER on the interface
selector, and turn the interface dial to
the desired frequency. To exit the
TUNE mode, press ENTER on the
interface selector, then push the
interface selector up to go back.
SKIP (SEEK) － The skip (seek)
function searches up and down from
the current frequency to find a
station with a strong signal. To
activate it, press either side (
or
) of the SKIP bar, then release it.
SCAN － The SCAN function
samples all stations with strong
signals on the selected band. To
activate it, press the SCAN side of
the SCAN/TITLE bar, then release
it.
To scan with the interface dial, push
the interface selector down, and turn
the interface dial to select Scan, then
press ENTER on the interface
selector.
TUNE
SCAN
Playing the AM/FM Radio (Models with navigation system)
280
10/07/06 18:05:30 11 ACURA ZDX KA KC MMC North America Own 50 31SZN610 enu
2011 ZDX