Acura 2011 ZDX - Manual (Page 417)

To change your security pass code:
Press and release the HFL Talk
button before a command.
1. Say ‘‘System setup.’’
2. Say ‘‘Change passcode’’ after the
prompts.
3. Follow the HFL prompts and say
the new 4-digit passcode.
4. Follow the HFL prompts to
confirm the number.
To select either a ring tone or a
prompts as the incoming call
notification
ꭧ :
Press and release the HFL Talk
button before a command.
1. Say ‘‘System setup.’’
2. Say ‘‘Call notification’’ after the
prompts.
3. Follow the HFL prompts and say
‘‘Ring tone’’ or ‘‘Prompt.’’ You
can also say ‘‘Off’’ for no audible
incoming call notification.
ꭧ: The default setting is a ring tone.
To activate or deactivate the auto
transfer function:
If you get into the vehicle while you
are on the phone, the call can be
automatically transferred to HFL
with the ignition switch in the
ACCESSORY (I) or ON (II) position.
Press and release the HFL Talk
button before a command.
1. Say ‘‘System setup.’’
2. Say ‘‘Auto transfer’’ after the
prompts.
3. HFL will let you know if auto
transfer is on or off, depending on
the previous setting. Follow the
HFL prompts to change the
setting.
CONTINUED
Bluetooth ® HandsFreeLink ® (Models without navigation system)
413
Features
10/07/06 18:05:30 11 ACURA ZDX KA KC MMC North America Own 50 31SZN610 enu
2011 ZDX