Acura 2011 ZDX - Manual (Page 114)

Press the SEL/RESET button to see
the selections.
Select the desired setting by
pressing the INFO (
▲/▼) button,
then enter your selection by pressing
the SEL/RESET button.
When your selection is successfully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
If the ‘‘SETTING INCOMPLETE’’
message appears, go back to ‘‘TRIP
COMPUTER TRIP A INFO RESET ’’
and repeat the procedure again.
Adjust Alarm Volume
Select the warning alarm volume
from three levels.
You can choose this customize item
from
‘‘METER SETUP’’ by pressing
the INFO ( ▲/▼) button repeatedly.
Multi-Information Display
110
10/07/06 18:05:30 11 ACURA ZDX KA KC MMC North America Own 50 31SZN610 enu
2011 ZDX