ACS AET62 NFC Reader with Fingerprint Sensor - Manual (Page 7)

3.0. Implementation
3.1. Communication Flow Chart of AET62
The Standard Microsoft CCID and PCSC drivers are used. Therefore, no ACS drivers are required
because the drivers are already built inside the windows operating system. You need to modify your
computer’s registry settings to be able to use the full capabilities of the AET62 NFC Reader. See
AET62 PCSC Escape Command for more details.
Figure 2: Communication Flow Chart of AET62
3.2. Smart Card Reader Interface Overview
Just click the “Device Manager” to find out the “AET62 PICC Interface”. The standard Microsoft USB
CCID Driver is used.
Document Title Here Document Title Here
Document Title Here AET62 Reference Manual
Version 1.00
Page 7 of 35
[email protected]
www.acs.com.hk