ACS AET62 NFC Reader with Fingerprint Sensor - Manual (Page 36)

Document Title Here Document Title Here
Document Title Here
Example 6: To blink the Red and Green LEDs of 1Hz for 3 times
// Assume both the Red and Green LEDs are initially OFF. //
// Both Initial Red and Green Blinking States are ON //
Red LED On
Red LED Off
T2 =
500ms T1 =
500ms
Green LED On
Green LED Off
1Hz = 1000ms Time Interval = 500ms ON + 500 ms OFF
T1 Duration = 500ms = 0x05
T2 Duration = 500ms = 0x05
Number of repetition = 0x03
APDU = “FF 00 40 F0 04 05 05 03 03”
Response = “90 00”
Example 7: To blink the Red and Green LED in turn of 1Hz for 3 times
// Assume both Red and Green LEDs are initially OFF. //
// The Initial Red Blinking State is ON; The Initial Green Blinking States is OFF //
Red LED On
Red LED Off
T2 =
500ms T1 =
500ms
Green LED On
Green LED Off
1Hz = 1000ms Time Interval = 500ms ON + 500 ms OFF
T1 Duration = 500ms = 0x05
T2 Duration = 500ms = 0x05
Number of repetition = 0x03
APDU = “FF 00 40 D0 04 05 05 03 01”; Response = “90 00”
AET62 Reference Manual
Version 1.00
Page 36 of 35
[email protected]
www.acs.com.hk