ACS AET62 NFC Reader with Fingerprint Sensor - Manual (Page 25)

8.3. How to Access FeliCa Tags (ISO 18092)?
Typical sequence may be:
- Present the FeliCa Tag and Connect the PICC Interface
- Read / Update the memory of the tag
Step 1) Connect the Tag
The ATR = 3B 8F 80 01 80 4F 0C A0 00 00 03 06 03
F0 11 00 00 00 00 8A
In which,
F0 11 = FeliCa 212K
Step 2) Read the memory block
without using Pseudo APDU .
<< 10 06 [8-byte NFC ID] 01 09 01 01 80 00
>> 1D 07 [8-byte NFC ID] 00 00 01 00 AA 55 AA 55 AA 55 AA 55 AA 55 AA 55
AA 55 AA [90 00]
Or
Step 2) Read the memory block
using Pseudo APDU .
<< FF 00 00 00 [13] D4 40 01 10 06 [8-byte NFC ID] 01 09 01 01 80 00
In which,
[13] is the length of the Pseudo Data “ D4 40 01 .. 80 00 ”
D4 40 01 is the Data Exchange Command
>> D5 41 00 1D 07 [8-byte NFC ID] 00 00 01 00 AA 55 AA 55 AA 55 AA 55 AA
55 AA 55 AA 55 AA [90 00]
In which, D5 41 00 is the Data Exchange Response
Note: The NFC ID can be obtained by using the APDU “FF CA 00 00 00”
Please refer to the FeliCa specification for more detailed information.
8.4. How to Access NFC Forum Type 1 Tags (ISO 18092), e.g.
Jewel and Topaz Tags?
Typical sequence may be:
- Present the Topaz Tag and Connect the PICC Interface
- Read / Update the memory of the tag
Step 1) Connect the Tag
The ATR = 3B 8F 80 01 80 4F 0C A0 00 00 03 06 03
F0 04 00 00 00 00 9F
In which, F0 04 = Topaz
Step 2) Read the memory address 08 (Block 1: Byte-0) without using Pseudo APDU
<< 01 08
>> 18 [90 00]
In which, Response Data = 18
Or
Step 2) Read the memory address
08 (Block 1: Byte-0) using Pseudo APDU
<< FF 00 00 00 [05] D4 40 01 01 08
In which,
[05] is the length of the Pseudo APDU Data “ D4 40 01 01 08 ”
D4 40 01 is the Data Exchange Command.
01 08 is the data to be sent to the tag.
>> D5 41 00 18 [90 00]
In which, Response Data = 18
Document Title Here Document Title Here
Document Title Here AET62 Reference Manual
Version 1.00
Page 25 of 35
[email protected]
www.acs.com.hk