ACS AET62 NFC Reader with Fingerprint Sensor - Manual (Page 21)

Response Data Out
Result PICC Operating Parameter
Table 40: Response Format (1 byte)
7.5. Set the PICC Operating Parameter
This is used to set the PICC Operating Parameter of the reader.
Command Class INS P1 P2 Le
Get
Response
0xFF 0x00 0x51
New PICC
Operating
Parameter 0x00
Table 41: Command Format (5 Bytes)
Response Data Out
Result PICC Operating Parameter
Table 42: Response Format (1 byte)
Bit Parameter Description Option
7 Auto PICC Polling To enable the PICC Polling
1 = Enable
0 = Disable
6 Auto ATS Generation
To issue ATS Request whenever an
ISO14443-4 Type A tag is activated 1 = Enable
0 = Disable
5 Polling Interval
To set the time interval between
successive PICC Polling. 1 = 250 ms
0 = 500 ms
4 FeliCa 424K
1 = Detect
0 = Skip
3 FeliCa 212K
1 = Detect
0 = Skip
2 Topaz
1 = Detect
0 = Skip
1 ISO14443 Type B
1 = Detect
0 = Skip
0
ISO14443 Type A
#To detect the Mifare
Tags, the Auto ATS
Generation must be
disabled first.
The Tag Types to be detected
during PICC Polling.
1 = Detect
0 = Skip
Table 43: PICC Operating Parameter. Default Value = FF
Document Title Here Document Title Here
Document Title Here AET62 Reference Manual
Version 1.00
Page 21 of 35
[email protected]
www.acs.com.hk