ACR&Artex C406-N - Manual (Page 87)

25-62-13
Page 87 of 109
MAR 1/13
ACR ELECTRONICS, INC / ARTEX PRODUCTS
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
C406-N (453-5060), C406-N HM (453-5061)
SUBTASK 25-62-13-870-003
C. PA Programming
CAUTION: THE PROGRAMMING AND LABELING OF THE ELT MUST MATCH THE AIRCRAFT IN
WHICH IT IS INSTALLED. REMARK THE ELT PRODUCT LABEL AS NECESSARY TO
REFLECT NEW PROGRAMMING AND/OR COUNTRY OF REGISTRY. CONTACT THE
LOCAL REGULATORY AUTHORITIES RESPONSIBLE FOR ELT REGISTRATION. SEE
APPENDIX A – ELT REGISTRATION ON PAGE 83.
(1) The PA may be programmed with any aircraft ID [i.e., 24-bit address or registration number
(tail number)].
(2) The 453-5078 PA is available from ACR Electronics pre-programmed with an aircraft ID.
(3) An alternative version of the PA (453-5068) is available unprogrammed (blank).
(4) Either version of the PA can be programmed in the field. Contact ACR Electronics for the
hardware and software required to program the PA.
SUBTASK 25-62-13-870-004
D. Operation
(1) PA operation is automatic.
(2) The ELT is reprogrammed with aircraft ID information when +28 VDC aircraft power is applied
to the ELT.