beautypg.com

2 switch gui overview, 3 quick setup, Switch gui overview -8 – Accusys ExaSAN SW-08 User Manual

Page 33: Quick setup -8

background image

3. Installation

User Guide

Page 3-8

3.3.1.2 Switch GUI Overview

We are now at the switch GUI main menu page. You may toggle between “Config Mode” and “View
Mode” by clicking the “Switch Mode” icon (the “ranch” or “eye” icon) at the top-right. You may also
select one of the GUI features to administer system function. See Section 4.2, “Switch GUI,” for detailed
information.

Note that before you perform any system administration function, you should set your system date and
time first. See Section 4.2.2, “System Management,” bullet item number 2, “Time,” for instructions.

3.3.1.3 Quick Setup

The Quick Setup scenario described in this section is only a typical example. Please make sure you read
Section 4.2.2.1, “Quick Setup,” for additional information and considerations.

In this example, we will create two LUNs in the RAID disk system. One is for the Xsan metadata and the
other for the user data.
1. Select “Quick Setup” and “RAIDSet” from the menu options on the left pane to start the process.