4 operating environment, 5 security, Operating environment -2 – Accusys ExaSAN SW-08 User Manual
Page 24: Security -2

2. Preparation
User Guide
Page 2-2
4. When planning for electrical power, make sure you have more power than the total power
requirements specified for all components. Also make certain that the power load is distributed evenly
among circuits to that location. Consult an electrician or other expert if you need assistance with
planning for the power needs of your components.
5. Make sure that the power outlets for all hardware components are grounded according to local and
national standards. Consult an electrician if you need assistance with grounding.
2.4 Operating Environment
The operating environment for the ExaSAN Compact system must meet certain requirements:
1. Verify that the temperature range of the chosen location is within the limits established for the system
and all other components.
2. Make certain that the chosen location has adequate ventilation to maintain the necessary temperature
range.
3. If there are multiple hardware components installed at the chosen location, consider additional
cooling measures to assure efficient operation of the system and other components.
4. Environment parameters:
a. Operating temperature: 0°C to 40°C (32°F to 104°F)
b. Storage temperature: -40°C to 70°C (-40°F to 158°F)
c. Operating humidity: 5-85%, non-condensing
d. Storage humidity: 0-95%, non-condensing
2.5 Security
To ensure the security of the ExaSAN Compact system, make certain that the chosen location is secure
and that only authorized staff members or technicians can gain access to this location.