beautypg.com

Headlights – FIAT Bravo User Manual

Page 87

background image

HEADLIGHTS

ADJUSTING
THE HEADLIGHT BEAM

Proper adjustment of the headlight beams
is of vital importance for your safety and
comfort and also for the other road users.
To ensure you and other drivers have the
best visibility conditions when travelling
with the headlights on, the headlights must
be set properly. Contact Fiat Dealership
to have the headlights properly adjusted.

IMPORTANT When turning on gas dis-
charge headlight lamps (for versions/ mar-
kets, where provided), it is normal that
there should be a vertical movement of
lenses, and consequently the same will al-
so happen to the light beam, for the time
required to achieve the correct headlight
trim stabilisation, equal to approx. 2 sec-
onds.

HEADLIGHT AIMING DEVICE

This device can be operated with the ig-
nition key at MAR and dipped beams on.
When the car is loaded, it slopes back-
wards. This means that the headlight beam
rises. In this case, it is necessary to return
it to the correct position.

85

SAFETY DEVICES

CORRECT USE OF THE CAR

W

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

To adjust the headlight slant

Press buttons A and B-fig. 100 set on the
central panel; if the car is fitted with
(Xenon) gas discharge headlights, slant ad-
justment is electronic and therefore but-
tons A and B are not present.

Press button A this will increase headlight
aiming by one position. Press button B to
decrease headlight aiming by one position.

Displays C, located on the instrument
panel, provides the visual indication of the
positions during the adjustment operation.

Correct positions as a function
of the load

Position 0 - one or two passengers on

front seats.

Position 1 - five passengers.

Position 2 - five passengers + load in the

boot.

Position 3 - driver + maximum admitted

load in the boot.

IMPORTANT Check beam aiming every
time the load carried changes.

FOG LIGHT ADJUSTMENT

Contact Fiat Dealership to have the head-
lights properly adjusted.

HEADLIGHT BEAM
ADJUSTMENT ABROAD

The dipped beam headlights are adjusted
for circulation in the country in which the
car is marketed. In countries with oppo-
site circulation, to avoid glaring oncom-
ing vehicles, it is necessary to cover the
areas of the headlight using a special stick-
er tape provided for the purpose and avail-
able at Lineaccessori Fiat. Contact Fiat
Dealership.

fig. 100

F0Q0644m

083-110 BRAVO GB:083-104 BRAVO GB 1-04-2011 15:44 Pagina 85