FIAT Bravo - Manual (Page 14)

12
SAFETY DEVICES
CORRECT USE OF THE CAR
W
ARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX
DASHBOARD AND CONTROLS
Closing the doors and the tailgate
Briefly press button
Á
for remote lock-
ing of doors and tailgate and simultaneous
alarm (for versions/markets, where pro-
vided) activation, switching off of the in-
ternal ceiling lights and single flashing of di-
rection indicators.
Press button
Á
for more than 2 seconds
to close the windows. If the button is
briefly pressed twice, the safe lock device
(for versions/markets, where provided) is
activated (see next paragraph “Safe lock
device”).
If one or more doors are open, locking
will not be activated and the central pan-
el led A-fig. 10 and direction indicators
will flash rapidly. If only the tailgate is open
the doors will lock.
Opening the tailgate by the
remote control
Press button R to open the tailgate by
remote control even if the alarm (for ver-
sions/markets, where provided) is on.
Opening the tailgate is accompanied by the
direction indicators flashing twice; clos-
ing is accompanied by a single flash only if
the alarm is on.
Opening the tailgate (with alarm on) will
obtain the deactivation of boot volumet-
ric protection and perimetral sensor.
Closing the tailgate will reactivate boot
volumetric protection and perimetral sen-
sor.
fig. 10 F0Q0742m
Leds on central panel
When locking the doors, led A-fig. 10
switches on for about 3 seconds and than
starts flashing (deterrence function).
Once doors are locked, if one or more
doors or the tailgate are not closed cor-
rectly, the led and direction indicators
start flashing quickly.
001-022 BRAVO GB:001-022 BRAVO GB 15-03-2011 12:04 Pagina 12