FIAT Bravo - Manual (Page 115)

DASHBOARD AND CONTROLS
CORRECT USE OF THE CAR
W
ARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX
SAFETY DEVICES
113
ADJUSTING THE FRONT SEAT
BELT HEIGHT
(for versions/markets, where provided)
Four different adjustments in height are
provided.
To adjust, press button A-fig. 4 and low-
er or raise the grip B.
Always adjust the height of the seat belt
to fit the person wearing it. This precau-
tion could greatly reduce the risk of injury
in case of collision.
Correct adjustment is obtained when the
belt passes half way between the end of
the shoulder and the neck.
fig. 4 F0Q0697m
Make the height adjustment
when the car is stationary.
WARNING
After adjustment, always
check that the slider is an-
chored in one of the positions pro-
vided. To do this, with the button A-
fig. 4 released, exert a further pres-
sure to allow the anchor device to
catch if release did not take place at
one of the preset position.
WARNING
S.B.R. SYSTEM
The vehicle is equipped with an S.B.R. sys-
tem (Seat Belt Reminder) made up of a
buzzer which, together with the seat belt
not fastened warning light
< in the in-
strument panel flashing, warns the driver
and, on some versions, the front passen-
ger that their seat belt is not fastened.
For permanent deactivation, contact Fiat
Dealership.
With multifunction display, the S.B.R. sys-
tem can only be reset at Fiat Dealership.
With reconfigurable multifunction display,
the S.B.R. system can also be reset through
the set-up menu.
111-130 BRAVO GB.qxd:105-128 BRAVO GB 23-04-2010 11:46 Pagina 113