FIAT Bravo - Manual (Page 63)

61
SAFETY DEVICES
CORRECT USE OF THE CAR
WARNING LIGHTS AND MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD AND CONTROLS
DEVICE ENGAGEMENT
Turn knurled ring A-fig. 54 to ON.
The device may only be engaged in 4 th or
higher speeds. Travelling downhill with the
device engaged, the car speed may in-
crease more than the memorised one.
When the device is activated, the warning
light Ü on the instrument panel turns on
(together with the message on the display)
(see section “Warning lights and mes-
sages”).
TO MEMORISE SPEED
Proceed as follows:
❒ turn the knurled ring A-fig. 54 to ON
and press the accelerator pedal to the
required speed;
❒ turn the knurled ring B to (+) for at
least three seconds, then release it. The
car speed is memorised and it is there-
fore possible to release the accelerator
pedal.
In the case of need (when overtaking for
instance) acceleration is possible simply
pressing the accelerator pedal: releasing
the accelerator pedal, the car will return
to the speed memorised previously.
fig. 54 F0Q0648m
CRUISE CONTROL
(constant speed
regulator)
(for versions/markets, where provided)
It is a device able to support the driver,
with electronic control, which allows dri-
ving at speed over 30 km/h on long and
straight dry roads (e.g.: motorways), at a
desired speed, without pressing the ac-
celerator pedal.
Therefore it is not suggested to use this
device on extra-urban roads with traffic.
Do not use it in town.
058-082 BRAVO GB.qxd 8-04-2010 10:17 Pagina 61