FIAT Bravo User Manual

Page 64

SAFETY DEVICES

CORRECT USE OF THE CAR

WARNING LIGHTS AND MESSAGES

IN AN

EMERGENCY

CAR

MAINTENANCE

TECHNICAL

SPECIFICATIONS

INDEX

DASHBOARD AND CONTROLS

Whilst driving with the de-
vice on, do not place the

gear lever in neutral and do not move
the Dualogic gear lever into position
N or R.

WARNING

In the event of device mal-
function or failure, turn the

knurled ring A-fig. 54 to OFF and con-
tact a Fiat Dealership after checking
the protection fuse integrity.

WARNING

TO RESET THE
MEMORISED SPEED

If the device has been disengaged for ex-
ample pressing the brake or clutch pedal,
the memorised speed can be reset as fol-
lows:
❒ accelerate gradually until reaching a

speed approaching the one memorised;

❒ engage the gear selected at the time of

speed memorising (4

, 5

or 6

gear);

❒ press button C-fig. 54.

TO INCREASE THE
MEMORISED SPEED

The speed memorised can be increased in
two ways:
❒ pressing the accelerator and then mem-

orising the new speed reached;

or
❒ turning the knurled ring B-fig. 54 tem-

porarily to (+).

Each turn of the knurled ring will corre-
spond to a slight increase in speed (about
1 km/h), while keeping the knurled ring
turned will correspond to a continuous
speed increase.

TO REDUCE
MEMORISED SPEED

The speed memorised can be increased in
two ways:
❒ disengaging the device and then mem-

orising the new speed;

or
❒ keeping the knurled ring B-fig. 54 to

(–) until reaching the new speed which
will be memorised automatically.

Each turn of the knurled ring will corre-
spond to a slight reduction in speed (about
1 km/h), while keeping the knurled ring
turned will correspond to a continuous
speed reduction.

DEVICE DISENGAGEMENT

Turn the knurled ring A-fig. 54 to OFF
or the ignition key to STOP. The device
is automatically deactivated also in one of
the following cases:
❒ pressing the brake or clutch pedal;
❒ ASR or ESP cut-in (for versions/ mar-

kets, where provided);

❒ changing gear on versions with a Dua-

logic gearbox (for versions/markets,
where provided), if in Manual mode

❒ inadvertently moving the Dualogic gear

lever (for versions/markets, where pro-
vided) to position N or R.

058-082 BRAVO GB.qxd 8-04-2010 10:17 Pagina 62