FIAT Bravo User Manual

Page 39

SAFETY DEVICES

CORRECT USE OF THE CAR

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

IMPORTANT The variation of the auton-
omy value can be influenced by different
factors: driving style (see what is described
in paragraph “Driving style” in the chap-
ter “Start-up and driving”), type of route
(highways, urban, mountain, etc…), use
conditions of the car (load transported,
tire pressure, etc…). What was described
previously must be taken in consideration
when planning a trip.

Trip distance

This value shows the distance covered
from the start of the new mission.

Average consumption

This value shows the average consump-
tion from the start of the new mission.

Instant consumption

Represents the indicative average of con-
sumptions from the beginning of the new
mission.

Average speed
This value shows the car average speed as
a function of the overall time elapsed since
the start of the new mission.

Travel time

This value shows the time elapsed since
the start of the new mission.

TRIP button fig. 26b

The TRIP button, set on right steering
column stalk, shall be used (with ignition
key at MAR), to display and to reset the
previously described values to start a new
mission:
– short push to display the different values;
– long push to reset and then start a new
mission.

New mission

Reset can be:
– “manual” resetting by the user, by press-
ing the relevant button;
– “automatic” resetting, when the “trip
distance” reaches 9999,9 km or when the
“trip time” reaches 99.59 (99 hours and
59 minutes);
– after disconnecting/reconnecting the
battery.

IMPORTANT The reset operation in the
presence of the screens concerning the
“Trip A” makes it possible to reset only
the information associated with this func-
tion.

IMPORTANT The reset operation in the
presence of the screens concerning the
“Trip B” makes it possible to reset only
the information associated with this func-
tion.

Start of journey procedure

With ignition key at MAR, press and keep
button TRIP pressed for over 2 seconds
to reset.

Exit Trip

The TRIP function is quitted automati-
cally after all values have been displayed or
by keeping button MODE pressed for
over 1 second.

fig. 26b

F0Q0647m

023-037 BRAVO GB:023-036 BRAVO GB 28-04-2010 12:08 Pagina 37