3Com NBX 3101 - Manual (Page 33)

Status Lights for System Appearance Buttons 33
Access buttons have these default settings:
1 System Appearance button 1.
2 System Appearance button 2.
3 Feature button — Allows you to access features that are not directly
assigned to an Access button on your telephone. See the NBX Feature
Codes Guide in the NBX NetSet utility for a list of features and codes and
how to use them.
4 Transfer button — Sends the currently active call to another telephone.
See “Transferring a Call” in Chapter 7 .
The telephone LabelMaker, which is available through the NBX NetSet
utility, enables you to define and print a new label for your Access
buttons.
Status Lights for
System Appearance
Buttons An Access button that is set up for incoming and outgoing calls is called a
System Appearance button. The light beside each System Appearance
button indicates the status. See
Table 8 .
Table 8 Status Indicator Lights for System Appearance Buttons
If the light is The line is
Off Available for use
Steady In use
Blinking quickly Ringing
Blinking slowly On hold