ZyXEL Communications ZyXEL Dimension ES-3024 - Manual (Page 139)

Dimension ES-3024 Ethernet Switch
Commands Introduction 21-11
COMMAND DESCRIPTION
enable Enables 802.1X security on the
switch.
disable Disables 802.1X security on the
switch.
status Shows switch 802.1X security
status.
port
enable Enables 802.1X security on the
specified port.
disable Disables 802.1X security on the
specified port.
reauth Turns re-authentication on or off
on the specified port.
reauthperiod Configures how often the
specified port should be re-
authenticated.
status Displays 802.1X security status
on the specified port.
set
auth Sets whether an external
RADIUS server or the internal
switch user database performs
authentication.
portcontrol
unauth>
Sets how the specified port
should be authenticated.
radius
server Sets the external RADIUS server
IP address.
secret Sets the external RADIUS server
password.
port Sets the external RADIUS server
port number.
show Displays the external RADIUS
server settings.
profile Internal switch user database.
Information in this database is
flushed on restarting the switch.
add Creates a username and
password profile in the internal
switch user database.
delete Deletes a username and
password profile in the internal
switch user database.