ZyXEL Communications ZyXEL Dimension ES-3024 - Manual (Page 134)

Dimension ES-3024 Ethernet Switch
21-6 Commands Introduction
Table 21-1 command summary
COMMAND DESCRIPTION
setCommunity [] Sets or displays the SNMP
SetRequest community.
trustedHost [] Sets or displays the SNMP trusted
host.
trapCommunity [] Sets or displays the SNMP Trap
community.
trapDest [] Sets or displays the SNMP trap
server.
disp Shows SNMP settings.
server access Enables or disables a service.
port Sets a port for a service.
secIP setEntry addr> [[TELNET]
[FTP] [WEB] [ICMP]]
Sets a secured entry.
secIP active Turns on a secured entry.
secIP inactive Turns off a secured entry.
sec IP disp Shows the secured entries.
disp Shows the device’s service port
numbers and access control
settings.
exit Ends the console or telnet
session.
ip
address [addr] Displays the host IP address.
alias Sets an alias for the specified
interface.
aliasdis <0|1> Disables/enables the alias for the
specified interface.
arp status Displays an interface’s IP Address
Resolution Protocol status.
httpd debug [on|off] Enables or disables the HTTP
debug flag.
icmp
status Displays the ICMP statistics
counter.
discovery [on|off] Sets the ICMP router discovery
flag.
ifconfig [iface] [ipaddr] [broadcast
|mtu |dynamic] Configures a network interface.