ZyXEL Communications ZyXEL Dimension ES-3024 - Manual (Page 132)

Dimension ES-3024 Ethernet Switch
21-4 Commands Introduction
Table 21-1 command summary
COMMAND DESCRIPTION
brief Displays a brief listing of packet
contents.
version Displays the RAS code and driver
versions.
view view Displays the specified text file.
wdog
switch [on|off] Turns the watchdog firmware
protection feature on or off.
cnt [value] Sets (0-34463) or displays the
current watchdog count (in 1.6 sec
units).
monitor status Displays the status of the
hardware monitor.
show Displays the hardware monitor’s
statistics.
vlimit Sets the maximum () or
minimum () voltage at the
specified point ().
tlimit Sets the maximum ()
temperature at the specified point
().
flimit Sets the maximum () fan
revs per minute (RPM) at the
specified fan () in the
specified bank (). A “bank”
delineates a set of fans.
fanmask [] Sets the fan detection mask in the
specified bank (). Use the
mask to disable monitoring of a
fan.
vclear Clears the voltage statistics.
tclear Clears the temperature statistics.
fclear Clears the fan statistics.
clear Clears the hardware monitor
statistics.
enable [] Enables or disables the hardware
monitor.
test Tests the hardware monitor chip.
ixe2424 lbt intlbt [count] ixe2424 refers to the switch chip.
Performs an internal loop back test
on a specified port or all ports.
lbt extlbt [count] Performs an external loop back
test on a specified port or all ports.