ZyXEL Communications ZyXEL Dimension ES-3024 User Manual
Page 136
Dimension ES-3024 Ethernet Switch
21-8
Commands Introduction
Table 21-1 command summary
COMMAND DESCRIPTION
traceroute
Sends ICMP packets to trace the
route of a remote host.
igmpsnoop
status
Displays the IGMP group table.
querier
Displays the port number of the
incoming port that received the
latest IGMP querier.
enable
Turns on IGMP snooping.
disable
Turns off IGMP snooping.
config save
This command stores tagged IEEE
802.1Q VLAN and STP
configurations only in nonvolatile
memory. All other command
configurations are lost when you
restart the switch.
The following commands are system switch commands; all are preceded with
sys sw
.
COMMAND DESCRIPTION
garp status
Shows the GARP timer status.
timer
timer(ms)> timer(ms)> Sets the GARP timer’s Join gvrp status Shows whether GVRP is enable Enables GVRP. disable Disables GVRP. qos defpri [<0..7>] Sets the default ingress User map <0..7> [ Maps a User Priority to a Traffic vlan1q All “sys sw vlan1q” commands port status Shows a port’s VLAN defaultvid Sets the default VLAN ID of a accept Sets the type of frames that a
Timer, Leave Timer and Leave
All Timer.
enabled or not.
Priority for a port.
Class.
relate to IEEE 802.1Q Tagged
VLAN configuration. Use “config
save” to save your configuration
changes.
information.
port.
port accepts.