ZyXEL Communications ZyXEL Dimension ES-3024 - Manual (Page 131)

Dimension ES-3024 Ethernet Switch
Commands Introduction 21-3
Table 21-1 command summary
COMMAND DESCRIPTION
switch [on|off] Enables/disables/ the system trace
log or shows whether it’s on or off.
online [on|off] Enables/disables the trace log
onscreen display (for example in
the telnet management window).
level [level] Sets the level (1-10) of trace logs
(1 shows the least) to display.
type Uses hexadecimal characters to
set the type of trace logs to record.
disp Shows the trace log.
clear Erases the trace log.
call Shows call events.
encapmask [mask] Shows which type of
encapsulation the trace log
records or sets it if you specify the
encapsulation’s hexadecimal
character.
trcpacket
create Creates a packet trace buffer.
destroy Removes the packet trace buffer.
channel
[none|incoming|outgoing|bothway
]
Sets the packet trace direction for
a given channel.
string [on|off] Enables/disables the sending of a
log to the trace packet buffer when
configuration changes are made or
displays the current setting.
switch [on|off] Enables/disables packet trace or
displays the current setting.
disp Displays the trace packets.
udp Sends the trace packets to
another system using UDP.
udp switch [on|off] Enables/disables the sending of
the trace packets to another
system using UDP or displays the
current setting.
udp addr Sets the target IP address for
sending trace packets using UDP.
udp port Sets the UDP port (should match
that of the target IP address) for
sending trace packets using UDP.
parse [[start_idx], end_idx] Displays detailed packet details of
the packet range specified.