1 phone number assignment, 2 storing phone number, Figure 19 at command example 1 – ZyXEL Communications ISDN Terminal Adapter Omni.Net Lite User Manual

Page 63

Text mode
Original mode

Omni.Net Lite User’s Guide

Chapter 3 Using AT Commands

3.4.1 Phone Number Assignment

Enter AT!pS= and press [ENTER] to assign the first phone number to

the PHONE 1 port.

Enter AT!pS= and press [ENTER] to assign the second phone number to

the PHONE 2 port.

Figure 19 AT Command Example 1

3.4.2 Storing Phone Number

To store a phone number (1234567 for example) on the TA, use the AT-Zd=number> [/] command for data calls and the AT\Zd=number> [/] command for voice calls.