ZyXEL Communications ISDN Terminal Adapter Omni.Net Lite - Manual (Page 28)

Omni.Net Lite User’s Guide
27 Chapter 2 Using the Utility
2.3 System
Click System to display the screen as shown next. Select your country from the Country
Selection Code drop-down list. The default is Other.
PPP/MP Parameters Use this screen to configure PPP/MP settings.
V.24 Signal Use this screen to define how to treat data control signal.
Incoming Call Screen Use this screen to set restrictions on incoming data calls.
Outgoing Call Screen Use this screen to set restrictions on outgoing data calls
Pre-stored Numbers Use this screen to store up to five phone numbers for
data calls on the TA.
Advance Setting Use this screen to configure the advanced settings,
including charge information.
Analog Port Use these screens under this menu to configure the
analog ports.
Local DN and Options Use this screen to assign phone number(s) to voice calls,
set port priority, caller ID service types and dialing
method.
Incoming Call Screen Use this screen to set restrictions on incoming voice calls.
Outgoing Call Screen Use this screen to set restrictions on outgoing voice calls.
Pre-stored Numbers Use this screen to store up to five phone numbers for
voice calls on the TA.
Supplementary Service Use this screen to enable or disable the call waiting
feature.
Table 3 Screens Summary
MENU SUB-MENU FUNCTION