ZyXEL Communications P-660HW-D Series - Manual (Page 193)

P-660HW-D Series User’s Guide
Chapter 13 Bandwidth Management 192
13.9.1 Rule Configuration
Click the Edit icon or select User Defined from the Service drop-down list in the Rule Setup
screen to configure a bandwidth management rule. Use bandwidth rules to allocate specific
amounts of bandwidth capacity (bandwidth budgets) to specific applications and/or subnets.
Figure 106 Bandwidth Management Rule Configuration
The following table describes the labels in this screen.
Apply Click Apply to save your changes back to the ZyXEL device.
Cancel Click Cancel to begin configuring this screen afresh.
Table 76 Bandwidth Management: Rule Setup (continued)
LABEL DESCRIPTION
Table 77 Bandwidth Management Rule Configuration
LABEL DESCRIPTION
Rule Configuration
Active Select this check box to have the ZyXEL device apply this bandwidth
management rule.
Enable a bandwidth management rule to give traffic that matches the rule priority
over traffic that does not match the rule.
Enabling a bandwidth management rule also allows you to control the maximum
amounts of bandwidth that can be used by traffic that matches the rule.