ZyXEL Communications P-660HW-D Series - Manual (Page 121)

P-660HW-D Series User’s Guide
Chapter 7 Wireless LAN 120
7.5.1.2 Wireless Client
Start the ZyXEL utility and click the Adapter tab. Select the OTIST check box, enter the
same Setup Key as your AP’s and click Save.
Figure 63 Example Wireless Client OTIST Screen
7.5.2 Starting OTIST
Note: You must click Start in the AP OTIST web configurator screen and in the
wireless client(s) Adapter screen all within three minutes (at the time of
writing). You can start OTIST in the wireless clients and AP in any order but
they must all be within range and have OTIST enabled.
1 In the AP, a web configurator screen pops up showing you the security settings to
transfer. You can use the key in this screen to set up WPA-PSK encryption manually for
non-OTIST devices in the wireless network. After reviewing the settings, click OK.
Figure 64 Security Key
2 This screen appears while OTIST settings are being transferred. It closes when the
transfer is complete.
Figure 65 OTIST in Progress (AP) Figure 66 OTIST in Progress (Client)