beautypg.com

ZyXEL Communications P-660HW-TX User Manual

Page 97

background image

P-660HW-Tx v2 Series Support Notes

ZyXEL MAC Filter Implementation

ZyXEL's MAC Filter Implementation allows users to define a list to allow or
block association from STAs. The filter set allows users to input 12 entries in
the list. If Allow Association is selected, all other STAs which are not on the list
will be denied. Otherwise, if Deny Association is selected, all other STAs which
are not on the list will be allowed for association. Users can choose either way
to configure their filter rule.

Configure the WLAN MAC Filter

The MAC Filter related settings in ZyXEL APs are configured in Web
Configurator, Advanced Setup, Network -> Wireless LAN ->MAC Filter.
Before you configure the MAC filter, you need to know the MAC address of the
client first. If not knowing what your MAC address is, please enter a command
"ipconfig /all" after DOS prompt to get the MAC (physical) address of your
wireless client.

Step 1: Login Web Configurator, Advanced Setup, Network -> Wireless LAN
->MAC Filter
, active MAC Filter.

Step 2: Enter the MAC Addresses of wireless cards in the filter set to allow or
deny association from these cards.

Key Settings:

Option

Descriptions

Filter Action

Allow or block association from MAC addresses contained in this list. If Allow

Association is selected in this field, hosts with MAC addresses configured in this list

will be allowed to associate with AP. If Deny Association is selected in this field,

hosts with MAC addresses configured in this list will be blocked.

96

All contents copyright © 2006 ZyXEL Communications Corporation.