Sua notes – ZyXEL Communications P-660HW-TX User Manual

Page 43

P-660HW-Tx v2 Series Support Notes

• Setup the P-660HW-Tx v2 as a DHCP Relay

We could set the P-660HW-Tx v2 as a DHCP Relay by the following command
in CLI:
Ip dhcp enif0 mode

relay

Ip dhcp enif0 relay server

[Server IP Address]

4. SUA Notes

Tested SUA/NAT Applications (e.g., Cu-SeeMe, ICQ, NetMeeting)

Introduction
Generally, SUA makes your LAN appear as a single machine to the outside
world. LAN users are invisible to outside users. However, some applications
such as Cu-SeeMe, and ICQ will need to connect to the local user behind the
P-660HW-Tx v2. In such case, a SUA server must be configured to forward the
incoming packets to the true destination behind SUA. After the required server
are configured in Web Configurator, Advanced Setup, Network -> NAT ->
Port Forwarding, the internal server or client applications can be accessed by
using the P-660HW-Tx v2's WAN IP Address.

SUA Supporting Table
The following are the required Web Configurator, Advanced Setup, Network
-> NAT -> Port Forwarding for the various applications running SUA mode.
ZyXEL SUA Supporting Table

Required Settings in Port Forwarding
Port/IP

Application

Outgoing Connection

Incoming
Connection

HTTP None

80/client

FTP None

21/client