ZyXEL Communications P-660HW-TX User Manual

Page 50

P-660HW-Tx v2 Series Support Notes

Example

The following example shows how to dial to an ISP via the P-660HW-Tx v2
and then establish a tunnel to a private network. There will be three items that
you need to set up for PPTP application, these are PPTP server (WinNT),
PPTP client (Win9x) and the P-660HW-Tx v2.

(1) PPTP server setup (WinNT)

• Add the VPN service from Control Panel ->Network
• Add an user account for PPTP logged on user
• Enable RAS port
• Select the network protocols from RAS such as IPX, TCP/IP NetBEUI
• Set the Internet gateway to P-660HW-Tx v2

(2) PPTP client setup (Win9x)

• Add one VPN connection from Dial-Up Networking by entering the

correct username & password and the IP address of the P-660HW-Tx
v2's Internet IP address for logging to NT RAS server.

• Set the Internet gateway to the router that is connecting to ISP

(3) P-660HW-Tx v2 setup

• Before making a VPN connection from Win9x to WinNT server, you

need to connect P-660HW-Tx v2 router to your ISP first.

• Enter the IP address of the PPTP server (WinNT server) and the

port number for PPTP as shown below:

Select service name as ‘PPTP’, fill in the Server IP Address, then press button
‘Add’.