ZyXEL Communications P-660HW-TX - Manual (Page 52)

P-660HW-Tx v2 Series Support Notes
5. Using Full Feature NAT
When P-660HW-Tx v2 is in Routing mode, you can select NAT Option as
Full Feature in Network -> Remote Node -> Edit:
Key Settings:
Field Options Description
Full Feature
When you select this option you can select
Address Mapping Set Number 1~8 in the
pull-down menu on the right.
None NAT is disabled when you select this option.
Network Address
Translation
SUA Only
When you select this option, this remote node
will use default SUA Address Mapping Set.
You can see it in CLI by command ‘ip nat
lookup 255’. It’s a read-only sets with two
rules: Many-to-One and server mapping.
Select Full Feature when you require other
mapping types.
Configuring NAT
Address Mapping Sets and NAT Server Sets
51
All contents copyright © 2006 ZyXEL Communications Corporation.