ZyXEL Communications P-660HW-TX - Manual (Page 117)

P-660HW-Tx v2 Series Support Notes
The 192.168.1.1 is the IP address of the Prestige. The local file is the source
file of the ZyNOS firmware that is available in your hard disk. The remote file is
the file name that will be saved in Prestige. Check the port number 69 and
512-Octet blocks for TFTP. Check 'Binary' mode for file transfering.
(2) Using TFTP to upload/download SMT configurations via LAN
Step 1: TELNET to your Prestige first before running the TFTP software
Step 2: Type the command 'sys stdio 0' to disable console idle timeout in
Command Line Interface (CLI).
Step 3: Run the TFTP client software
Step 4: To download the P-660HW-Tx v2 configuration, please get the
remote file 'rom-0' from the Prestige.
Step 5: To upload the P-660HW-Tx v2 configuration, please save the
remote file as 'rom-0' in the Prestige.
An example:
116
All contents copyright © 2006 ZyXEL Communications Corporation.