ZyXEL Communications 2864I - Manual (Page 98)

Novell IPX Configuration 85
Figure 8-6 Menu 12.2 - Edit IPX Static Route
1. Server Name - In this field, enter in the name that has been
configured for the server. This name must be the exact name
configured in the NetWare server.
2. Network # - This field contains the internal network number of
the remote server which you wish to access. Do not use
00000000 or FFFFFFFF for this field.
3. Node # - This field contains the address of the node on which
the server resides. If you are using a Novell IPX
implementation, this value is 000000000001.
4. Socket # - This field contains the socket number on which the
server will receive service requests. The default for this field is
hex 0451.
5. Type # - This field identifies the type of service the server
provides. The default for this field is hex 0004.
6. Gateway Node - In this field, enter the number (1-4) of the
Remote Node that is linked to this static route. That is, the
Remote Node that you wish to route the packet to.
The Hop Count and Tick Count fields have the same meaning as
those in the Remote Node Setup.