ZyXEL Communications 2864I - Manual (Page 70)

Remote Node Configuration 57
and Receive will only use incoming traffic to make this
determination.
If, after making the call to bring up a second channel, the second
channel does not succeed in joining the Multilink Protocol bundle
(because the remote device does not recognize the second call as
coming from the same device), the Prestige will hang up the second
channel and continue with the first channel alone.
Editing PPP Options
Figure 5-3 Remote Node PPP Options
1. Encapsulation - Select CCP (Compression Control Protocol)
for the PPP or MP link. There are two options in this field.
•
Standard PPP - Standard PPP options will be used.
•
CISCO PPP - Cisco PPP options will be used.
2. Compression - Turn on the Stac Compression. The default for
this field is Off.
3. Multiple Link Options: BOD Calculation - Select the
direction of the traffic you wish to calculate in order to
determine when to add or subtract a link. The default for this
field is Transmit or Receive.