ZyXEL Communications 2864I - Manual (Page 104)

Bridging Configuration 91
Once you have completed filling in the Network Layer Options
Menu, press ENTER to return to Menu 11. Press ENTER at the
message: Press ENTER to Confirm ... to save your selections, or
press ESC at any time to cancel your selections.
Default Dial-In Setup for Bridge
There is only one parameter you need to fill out for Bridging
applications.
•
PPP Options: Recv. Authen. - verify that this field is not set
to None Bridging applications must have some sort of
authentication turned on in order to match to a Remote Node.
Once you have completed filling in the menu, press ENTER at the
message: Press ENTER to Confirm ... to save your selections, or
press ESC at any time to cancel your selections.
Bridge Static Route Setup
You can configure Bridge static routes for your Bridging
applications.
Figure 9-3 Menu 12.4 - Bridge Static Route
1. Route Name - For identification purposes enter a name for the
bridge static route.