ZyXEL Communications 2864I - Manual (Page 60)

Configuring for Internet Access 47
Configuration for Single User Account
The steps for configuring your Prestige for Single User Internet
Access are identical to conventional Internet Access with the
exception that you need to fill in three extra fields.
Follow steps 1-8 from the previous section, Internet Access
Configuration.
1. Single User Account - Enter Yes to enable the Single User
Account feature. Use the space bar to toggle between Yes and
No.
2. Single User Account: IP Addr - If your ISP assigns you a
dynamic IP address, enter 0.0.0.0 here. If your ISP assigns you
a static IP address enter that IP address here.
3. Single User Account: Server IP Addr - If you want to make a
single server, e.g., a Web server, accessible to outside users,
enter that server’s IP address here.
Press ENTER at the message: Press ENTER to Confirm ... to
confirm your selections or press ESC at any time to cancel
your selections.
At this point, the Prestige will ask if you wish to test the
Internet connection. If you select Yes, the Prestige will call the
ISP to test the Internet connection. If the test fails, note the
error message that you receive and take the appropriate
troubleshooting steps.
Configuring Backup ISP Accounts
Sometimes it may be desirable to configure more than one ISP
account for backup purposes. The Single User Account feature can
be enabled for all of these accounts, making it convenient to switch
Internet Service Providers in the event of a failure.
To configure a backup ISP,