ZyXEL Communications 2864I - Manual (Page 124)

System Security 111
This will bring you to Menu 23.2 - System Security - External
Server.
Figure 12-1 Menu 23.2 - System Security - External Server
The fields in the System Security - External Server menu are as
follows:
1. Active - Determines whether the external security facility is
enabled. If this field contains No, only the built-in dial-up user
list will be used. If this field contains Yes, the built-in dial-up
user list will be searched first, then the external authentication
server.
2. Type - Determines the type of the external authentication
server. At present only the RADIUS type is supported.
3. Server Address - The IP address of your network’s UNIX-
based RADIUS server.
4. Port # - The IP port address used by the authentication server.
The default value of 1645 should be used.
5. Key - A “password” used to identify the Prestige as a valid
client of the RADIUS authentication service.
The Key password should be stored in the client file in the
RADIUS server’s /etc/raddb directory. Lines of the form