ZyXEL Communications ADSL2+ Ethernet Gateway P-660R-T Series - Manual (Page 82)

P-660R-T Series User’s Guide
Chapter 7 Network Address Translation (NAT) Screens 82
Figure 26 NAT Mode
The following table describes the labels in this screen.
Table 17 NAT Mode
LABEL DESCRIPTION
None Select this radio button to disable NAT.
SUA Only Select this radio button if you have just one public WAN IP address for your Prestige.
The Prestige uses Address Mapping Set 1 in the NAT - Edit SUA/NAT Server Set
screen.
Edit Details Click this link to go to the NAT - Edit SUA/NAT Server Set screen.
Full Feature Select this radio button if you have multiple public WAN IP addresses for your Prestige.
Edit Details Click this link to go to the NAT - Address Mapping Rules screen.
Apply Click Apply to save your configuration.
7.5 Configuring SUA Server
Note: If you do not assign an IP address in Server Set 1 (default server), the Prestige
discards all packets received for ports that are not specified here or in the
remote management setup.
Click NAT, select SUA Only and click Edit Details to open the following screen.
Refer to Table 16 on page 80 for port numbers commonly used for particular services.