2 syslog and accounting – ZyXEL Communications ADSL2+ Ethernet Gateway P-660R-T Series User Manual
Page 201

P-660R-T Series User’s Guide
201
Chapter 24 System Information and Diagnosis
Figure 136 Sample Error and Information Messages
52 Sat Jan 01 00:00:00 2000 PP12 INFO LAN promiscuous mode <1>
53 Sat Jan 01 00:00:00 2000 PP00 INFO Last errorlog repeat 1 Times
54 Sat Jan 01 00:00:00 2000 PP00 -WARN SNMP TRAP 0: cold start
55 Sat Jan 01 00:00:00 2000 PP00 INFO main: init completed
56 Sat Jan 01 00:00:00 2000 PP00 INFO Starting Connectivity Monitor
57 Sat Jan 01 00:00:00 2000 PP1c INFO monitoring WAN connectivity
58 Sat Jan 01 00:00:00 2000 PP0a WARN MPOA Link Down
59 Sat Jan 01 00:00:02 2000 PP09 -WARN SNMP TRAP 3: link up
60 Sat Jan 01 00:00:05 2000 PP1b INFO adjtime task pause 1 day
61 Sat Jan 01 00:01:36 2000 PP14 INFO SMT Password pass
62 Sat Jan 01 00:01:36 2000 PP00 INFO SMT Session Begin
63 Sat Jan 01 00:03:59 2000 PP00 WARN M1Save:Iface not found for DDNS
Clear Error Log (y/n):
24.4.2 Syslog and Accounting
The Prestige uses the syslog facility to log the CDR (Call Detail Record) and system messages
to a syslog server. Syslog and accounting can be configured in Menu 24.3.2 — System
Maintenance — UNIX Syslog, as shown next.
Figure 137 Menu 24.3.2 System Maintenance: Syslog and Accounting
Menu 24.3.2 - System Maintenance - UNIX Syslog
UNIX Syslog:
Active= No
Syslog IP Address= ?
Log Facility= Local 1
Types:
CDR= No
Packet Triggered= No
Filter Log= No
PPP Log= No
Press ENTER to Confirm or ESC to Cancel:
You need to configure the UNIX syslog parameters described in the following table to activate
syslog then choose what you want to log.
Table 64 Menu 24.3.2 System Maintenance : Syslog and Accounting
PARAMETER
DESCRIPTION
UNIX Syslog:
Active
Use [SPACE BAR] and then [ENTER] to turn syslog on or off.
Syslog IP Address
Type the IP address of your syslog server.
Log Facility
Use [SPACE BAR] and then [ENTER] to select one of seven different local
options. The log facility lets you log the message in different server files. Refer to
your UNIX manual.