ZyXEL Communications ADSL2+ Ethernet Gateway P-660R-T Series - Manual (Page 132)

P-660R-T Series User’s Guide
Chapter 16 Menu 3 LAN Setup 132
C
H A P T E R
16
Menu 3 LAN Setup
This chapter covers how to configure your wired Local Area Network (LAN) settings.
16.1 LAN Setup
This section describes how to configure the Ethernet using Menu 3 — LAN Setup. From the
main menu, enter 3 to display menu 3.
Figure 64
Menu 3 - LAN Setup
1. LAN Port Filter Setup
2. TCP/IP and DHCP Setup
Enter Menu Selection Number:
Menu 3 LAN Setup
16.1.1 General Ethernet Setup
This menu allows you to specify filter set(s) that you wish to apply to the Ethernet traffic. You
seldom need to filter Ethernet traffic; however, the filter sets may be useful to block certain
packets, reduce traffic and prevent security breaches.
Figure 65
Menu 3.1 - LAN Port Filter Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel:
Menu 3.1 LAN Port Filter Setup
If you need to define filters, please read Chapter 22 on page 178 first, then return to this menu
to define the filter sets.