ZyXEL Communications GS-2750 - Manual (Page 266)

Chapter 32 Access Control
GS-2750 User’s Guide
266
32.3.4 Configuring SNMP
From the Access Control screen, display the SNMP screen. You can click Access Control to
go back to the Access Control screen.
Table 106 SNMP Switch Traps
OPTION OBJECT LABEL OBJECT ID DESCRIPTION
stp STPNewRoot 1.3.6.1.2.1.17.0.1 This trap is sent when the STP root
switch changes.
MSTPNewRoot 1.3.6.1.4.1.890.1.5.8.44.107.7
0.1
This trap is sent when the MSTP root
switch changes.
STPTopologyChange 1.3.6.1.2.1.17.0.2 This trap is sent when the STP
topology changes.
MSTPTopologyChange 1.3.6.1.4.1.890.1.5.8.44.107.7
0.2
This trap is sent when the MSTP root
switch changes.
mactable MacTableFullEventOn 1.3.6.1.4.1.890.1.5.8.44.37.2.1 This trap is sent when more than
99% of the MAC table is used.
MacTableFullEventClear 1.3.6.1.4.1.890.1.5.8.44.37.2.2 This trap is sent when less than 95%
of the MAC table is used.
rmon RmonRisingAlarm 1.3.6.1.4.1.890.1.5.1.1.16.0.1 This trap is sent when a variable
goes over the RMON "rising"
threshold.
RmonFallingAlarm 1.3.6.1.4.1.890.1.5.1.1.16.0.2 This trap is sent when the variable
falls below the RMON "falling"
threshold.