ZyXEL Communications NPS-520 - Manual (Page 29)

Chapter 2 ZyXEL Utility
NPS-520 User’s Guide
29
Figure 10 ZyXEL Utility: System Setting
The following table describes the labels in this screen.
Table 7 ZyXEL Utility: System Setting
LABEL DESCRIPTION
System Setting
Print Server Name Enter a descriptive name to replace the NPS-520’s unique generated device
name (the last three characters of the NPS-520’s MAC address with the prefix
“ZyXEL”). You can enter up to 15 printable characters. Spaces are allowed.
Change Password Type a new administrator password for configuring the TCP/IP and system
settings. You can enter up to seven printable characters. Spaces are allowed.
Please note as you type a password, the screen displays a * for each character
you type.
Retype Password Type the new password for confirmation.
Print Server
Description
Type additional descriptive text for the NPS-520 if you want. You can enter up
to 15 ASCII characters. Spaces are allowed.
Save Click this button to save your changes to the NPS-520.
Cancel Click this button to return to the Status screen without saving changes.
Firmware Upgrade Type in the location of the .bin file you want to upload in this field or click
Browse to find it.
Browse Click Browse to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Find firmware at www.zyxel.com in a file that (usually) uses the system model
name with a .bin extension.