Xerox 8264E EN - Manual (Page 7)

1 Safety and Warning Label Information
100kg Unwinder / Winder User Guide 3
1.3 Operating Instructions Labels
This section explains the different types of operating instructions labels and where they are located.
The operating instruction labels are used in this product to briefly explain the operation method for
procedures that may require special attention when operating this product. Please ensure you
understand the exact locations and the contents of the labels before operating this product.
Make sure you can read all the contents on the operating instruction label.
If some of words or diagrams cannot be read, please clean the label.
To remove dirt from the operating instruction label, please use a cloth, water, and mild
detergent.
Do not use organic solvents or gasoline to clean the labels.
Operating instructions labels must be replaced if damaged, lost, or cannot be read.
Contact your local Xerox Representative if an warning label needs to be replaced.
1.3.1 Instruction Label Locations and Types
The figures below indicate the locations of the operating instruction labels.
1
Figure 3. Operating Instruction Label Location
No. Types of operating instruction label s
1