Xerox 8264E EN - Manual (Page 11)

2 Unwinder / Winder Operation
100kg Unwinder / Winder User Guide 7
2.1.3 Unwinder Control Panel
The Unwinder Control Panel is used to set the operating mode and to display the status of the
Unwinder.
2
5
3
1
4
Figure 6. Unwinder Control Panel
2.1.3.1 Switches / Button
No. Part name Function
1 Automatic
Operation
Switch
● OUTSIDE ROLL: Used when using paper rolled in the
outward direction.
● OFF: Feeding device does not operate.
● INSIDE ROLL: Used when using roll paper rolled in the
inward direction.
2 Manual
Operation
Switch
● NORMAL DRIVE: Feeding device operates in the
forward direction.
● REVERSAL: Feeding device operates in the reverse
direction.
3 Initialize Button Used to move the position of the tension roller to where
paper can be fed out.
2.1.3.2 Indicators
No. Part name State Function
4 Power Lamp Lit ● Power is ON.
● Stand-by.
Blinking During feeding
Off Power is OFF.
5 Error Lamp Lit Over-current error in feeding motor.
Blinking Time-out error.
Off No error.