Xerox 8264E EN - Manual (Page 10)

2 Unwinder / Winder Operation
6 100kg Unwinder / Winder User Guide
2.1.2 Winder Components
1
1
3
2
4
Figure 5. Location of Major Components (Winder)
No. Part name Function
1 Winder Spindles Rolls in the media after printing
2 Winder Tension Bar Roller Used to guide the media after printing to the roll-in
device. Tension Roller also activates the Winder
motor to take up slack in the media.
3 Media Core Used to roll in the media after printing.
4 Unwinder / Winder Control
Panel Used to set the operating condition and to display
the status of the product.
● 2.1.3 Unwinder Control Panel
● 2.1.4 Winder Control Panel