Xerox 8264E EN - Manual (Page 22)

2 Unwinder / Winder Operation
18 100kg Unwinder / Winder User Guide
14. Pull about 1 meter of roll media out from the Front Printer Plate.
1
2
Figure 24. Install Roll Media
No. Part name
1 Roll Media
2 Front Printer Platen
15. Set the Manual Operation Switch to “Reversal” to roll in the media slightly so that the paper has
tension and is straight.
Figure 25. Install Roll Media
● If you let go while rolling in the roll paper, the roll paper may fall off the printer platen and
may fall to the rear of the product.
● Ensure the right edge of the roll media is not to the right of the Media Setting Guide.
Setting the media to the right of the Media Setting Guide may affect the print quality.