Xerox 8264E EN - Manual (Page 19)

2 Unwinder / Winder Operation
100kg Unwinder / Winder User Guide 15
11. Set the Unwinder Automatic Operation Switch as described below:
・ If the paper will be printed on the outside of the roll media: OUTSIDE ROLL
・ If the paper will be printed on the inside of the roll media: INSIDE ROLL
Figure 20. Set the Automatic Operation Switch
12. Raise the tension roller located on the rear of the product with your hands. Roll media will
automatically be fed out.
2
1
Figure 21. Raise the Tension Roller
No. Part name
1 Roll Media
2 Tension Roller