Zoom X6v VoIP - Manual (Page 9)

Parameter Description Default
NTP IP Address Fully qualified domain name (FQDN)
(including an optional port number) for the
NTP/SNTP timeserver server time-a.nist.gov
Note : When the date and time are set independently of NTP (that is, if a timeserver is unavailable or the
use of a timeserver is disabled), adjustments must be made to a time at least one hour ahead or behind
the currently displayed time, to prevent errors related to the internal workings of the time system.
VoIP Subsystem Network Configuration
Parameter Description Default
VoIP Startup Delay (ms)
Manually configured VoIP subsystem
startup delay. This parameter configures
the VoIP subsystem to delay the indicated
time before booting up. Normally there is
no need to set it. If the VoIP subsystem
has trouble registering at power up, you
might set this delay to allow your X6v
sufficient time to establish a DSL
connection before the VoIP subsystem
attempts to register.
0
VoIP Name
Manually configured VoIP subsystem
device name.
ZOOM_VoIP
VoIP Host Name
Manually configured host device name (or
name automatically assigned and saved).
ZOOM_VoIP
VoIP Domain Name Manually configured domain name.
MTU Manually configured maximum transmit
unit size (range of 576 to 1500).
Note : the MTU setting is prepared for the
use of PPPoE. Some system
configurations require an MTU setting of
1500.
1492
Static IP/DNS Configuration
Parameter Description Default
Static IP Address Manually configured IP address (or
address automatically assigned and
saved) 192.168.0.234
Subnet Mask Manually configured local network mask
(or netmask automatically assigned and
saved) 255.255.255.0
Gateway IP Address Manually configured gateway IP address
(or address automatically assigned and
saved) 192.168.0.1
Primary DNS Address Manually configured IP address of
primary domain name server (DNS) 192.168.0.1
Chapter 3: System Parameters 9